🎉 Up to 70% Off Selected ItemsShop Sale
SINGLE FAUCET LEFT HAND
Fold down single tap. Left hand. Chrome plated.
- Thread is a little unusual on this tap, just 3/8 inch male BSP (most other water fittings are 1/2 inch)
- When folded down, this tap requires 75mm above the bench top for the handle. The spout needs 175mm from the centreline of the mounting hole it folds down into
- The tap is suitable for mains pressure. The flange that sits above the sink is approx 28mm diameter
- Thread is a little unusual on this tap, just 3/8 inch male BSP (most other water fittings are 1/2 inch)
- When folded down, this tap requires 75mm above the bench top for the handle. The spout needs 175mm from the centreline of the mounting hole it folds down into
- The tap is suitable for mains pressure. The flange that sits above the sink is approx 28mm diameter
$57.81
SINGLE FAUCET LEFT HAND—
$57.81
SINGLE FAUCET LEFT HAND
Fold down single tap. Left hand. Chrome plated.
- Thread is a little unusual on this tap, just 3/8 inch male BSP (most other water fittings are 1/2 inch)
- When folded down, this tap requires 75mm above the bench top for the handle. The spout needs 175mm from the centreline of the mounting hole it folds down into
- The tap is suitable for mains pressure. The flange that sits above the sink is approx 28mm diameter
- Thread is a little unusual on this tap, just 3/8 inch male BSP (most other water fittings are 1/2 inch)
- When folded down, this tap requires 75mm above the bench top for the handle. The spout needs 175mm from the centreline of the mounting hole it folds down into
- The tap is suitable for mains pressure. The flange that sits above the sink is approx 28mm diameter
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Fold down single tap. Left hand. Chrome plated.
- Thread is a little unusual on this tap, just 3/8 inch male BSP (most other water fittings are 1/2 inch)
- When folded down, this tap requires 75mm above the bench top for the handle. The spout needs 175mm from the centreline of the mounting hole it folds down into
- The tap is suitable for mains pressure. The flange that sits above the sink is approx 28mm diameter
- Thread is a little unusual on this tap, just 3/8 inch male BSP (most other water fittings are 1/2 inch)
- When folded down, this tap requires 75mm above the bench top for the handle. The spout needs 175mm from the centreline of the mounting hole it folds down into
- The tap is suitable for mains pressure. The flange that sits above the sink is approx 28mm diameter
